pass-within-tolerance_ref -- WaveLens Report

Reference pass-within-tolerance_ref.wav

Device Under Test pass-within-tolerance_dut.wav

48000 Hz · 24-bit · Stereo

Analysis Mode

Frequency Sweep

Spectral Fidelity

0.30 p99 ratio

THD+N

0.00 %

Overall Verdict

PASS

Bit-Exactness failed but is not gating the overall verdict — run with --bitexact to require an exact match. See the Bit-Exactness section below for details.

Signal Alignment

1.000Excellent

File Offset 0 smp (0.00 ms) · Disagreement 0 smp

L 1.000 · R 1.000

Spectral Fidelity

Checked across the whole file except the first and last 85 ms (58 points)

Pass

Left Channel

Bins Compared

5061

Bins Failed

P99 Ratio

0.300

Worst Bin

2513.7 Hz, -0.300000 dB

tolerance 1.000000 dB

at 0:07.0

Ref Peak Level

-17.1 dB

DUT Peak Level

-17.4 dB

Ref vs. DUT magnitude spectrum

Reference Device under test

Right Channel

Bins Compared

5061

Bins Failed

P99 Ratio

0.300

Worst Bin

2513.7 Hz, -0.300000 dB

tolerance 1.000000 dB

at 0:07.0

Ref Peak Level

-17.1 dB

DUT Peak Level

-17.4 dB

Ref vs. DUT magnitude spectrum

Reference Device under test

Signal Overview

Reference Only

Left Channel

Full signal

Reference Device under test

Right Channel

Full signal

Reference Device under test

Bit-Exactness

Fail

Samples Differing

959992 of 960000 · 100.0%

First Diff

frame 0 (0.00 ms)

ref 0.000658 → dut 0.000635 · Δ 0.000022

Worst Diff

frame 596 (12.42 ms)

ref 0.251188 → dut 0.242661 · Δ 0.008528

100.0% of samples differ

Level Fidelity

Pass

Gain Tracking

	L	R
Median	-0.300 dB	-0.300 dB
MAD	0.000 dB	0.000 dB
P99 \|Error\|	0.300 dB	0.300 dB
Sustained Run	0.0 ms	0.0 ms

Worst Point

	L	R
Worst Sample	311201	311201
Worst Diff	-0.305 dB	-0.305 dB
Ref Amplitude	0.000107	0.000107
DUT Amplitude	0.000103	0.000103

Artifact Detection

Pass

Channel

Events Counted

Minor Events

Samples Flagged

0 / 480000

Samples Excluded

131

Channel

Events Counted

Minor Events

Samples Flagged

0 / 480000

Samples Excluded

131

Distortion (THD+N)

Pass

Fundamental

632.8 Hz

THD+N

0.0000% (-133.3 dB)

Tolerance

1.00%

Loudness

Reference Only

Reference only -- run with --loudness to make this part of the overall verdict.

	Ref	DUT
Integrated Loudness	-11.1 LUFS	-11.4 LUFS	-0.30 LUΔ Loudness
Loudness Range (LRA)	5.4 LU	5.4 LU	-0.00 LUΔ LRA
True Peak	-12.0 dBTP	-12.3 dBTP	-0.30 dBΔ True Peak
Sample Peak	-12.0 dBFS	-12.3 dBFS	-0.30 dBΔ Peak
Max Momentary	-8.6 LUFS	-8.9 LUFS	-0.30 LUΔ Momentary
Max Short-term	-8.7 LUFS	-9.0 LUFS	-0.30 LUΔ Short-term

Configuration

resolved parameters this run used, and where each came from

Check	Parameter	Value	Source
Spectral Fidelity	Profile	freq_sweep	command line
Spectral Fidelity	FFT Size	8192	built-in default
Spectral Fidelity	Peak Tolerance	1.00 dB	built-in default
Spectral Fidelity	Continuous Scan	enabled	implied by sweep profile
Spectral Fidelity	Sweep Edge Skip	4096 samples at each end	built-in default
Level Fidelity	Profile	general	built-in default
Level Fidelity	P99 Tolerance	1.02 dB	built-in default
Level Fidelity	Min Sustained Run	20.0 ms	built-in default
Artifact Detection	Neighborhood Window	64 samples	built-in default
Artifact Detection	Minimum Severity	4×	built-in default
Artifact Detection	Min Silence/Clip Run	8 samples	built-in default
Artifact Detection	Minimum Whole-File Severity	100×	built-in default
Bit-Exactness	Gating	disabled	built-in default
Bit Accuracy	Enabled	no	built-in default