--bitexact to require an exact match. See the Bit-Exactness section below for details.Gain Tracking
| L | R | |
|---|---|---|
| Median | 0.000 dB | 0.000 dB |
| MAD | 0.000 dB | 0.000 dB |
| P99 |Error| | 66.151 dB | 66.151 dB |
| Sustained Run | 250.0 ms | 250.0 ms |
Worst Point
| L | R | |
|---|---|---|
| Worst Sample | 288526 | 288526 |
| Worst Diff | -68.000 dB | -68.000 dB |
| Ref Amplitude | 0.251189 | 0.251189 |
| DUT Amplitude | 0.000000 | 0.000000 |
Reference only -- run with --loudness to make this part of the overall verdict.
| Ref | DUT | ||
|---|---|---|---|
| Integrated Loudness | -11.1 LUFS | -11.2 LUFS | -0.12 LUΔ Loudness |
| Loudness Range (LRA) | 5.4 LU | 5.4 LU | -0.00 LUΔ LRA |
| True Peak | -12.0 dBTP | -11.0 dBTP | +0.99 dBΔ True Peak |
| Sample Peak | -12.0 dBFS | -12.0 dBFS | +0.00 dBΔ Peak |
| Max Momentary | -8.6 LUFS | -8.6 LUFS | +0.00 LUΔ Momentary |
| Max Short-term | -8.7 LUFS | -8.7 LUFS | -0.00 LUΔ Short-term |
| Check | Parameter | Value | Source |
|---|---|---|---|
| Spectral Fidelity | Profile | freq_sweep | command line |
| Spectral Fidelity | FFT Size | 8192 | built-in default |
| Spectral Fidelity | Peak Tolerance | 1.00 dB | built-in default |
| Spectral Fidelity | Continuous Scan | enabled | implied by sweep profile |
| Spectral Fidelity | Sweep Edge Skip | 4096 samples at each end | built-in default |
| Level Fidelity | Profile | general | built-in default |
| Level Fidelity | P99 Tolerance | 1.02 dB | built-in default |
| Level Fidelity | Min Sustained Run | 20.0 ms | built-in default |
| Artifact Detection | Neighborhood Window | 64 samples | built-in default |
| Artifact Detection | Minimum Severity | 4× | built-in default |
| Artifact Detection | Min Silence/Clip Run | 8 samples | built-in default |
| Artifact Detection | Minimum Whole-File Severity | 100× | built-in default |
| Bit-Exactness | Gating | disabled | built-in default |
| Bit Accuracy | Enabled | no | built-in default |